From ee61ef56f775e44fd0b857a960102148910e6dce Mon Sep 17 00:00:00 2001 From: Sam Anthony Date: Sat, 16 Aug 2025 14:59:36 -0230 Subject: usbcom: modified libusb example --- sw/config.h | 21 --------------------- 1 file changed, 21 deletions(-) delete mode 100644 sw/config.h (limited to 'sw/config.h') diff --git a/sw/config.h b/sw/config.h deleted file mode 100644 index f369673..0000000 --- a/sw/config.h +++ /dev/null @@ -1,21 +0,0 @@ -// CONFIG1 -#pragma config FOSC = INTOSC // Oscillator Selection Bits (INTOSC oscillator: I/O function on CLKIN pin) -#pragma config WDTE = OFF // Watchdog Timer Enable (WDT disabled) -#pragma config PWRTE = OFF // Power-up Timer Enable (PWRT disabled) -#pragma config MCLRE = ON // MCLR Pin Function Select (MCLR pin is MCLR) -#pragma config CP = OFF // Flash Program Memory Code Protection (Program memory code protection is disabled) -#pragma config BOREN = ON // Brown-out Reset Enable (Brown-out Reset enabled) -#pragma config CLKOUTEN = OFF // Clock Out Enable (CLKOUT function is disabled. I/O or oscillator function on the CLKOUT pin) -#pragma config IESO = OFF // Internal/External Switchover Mode (Internal/External Switchover Mode is disabled) -#pragma config FCMEN = OFF // Fail-Safe Clock Monitor Enable (Fail-Safe Clock Monitor is disabled) - -// CONFIG2 -#pragma config WRT = OFF // Flash Memory Self-Write Protection (Write protection off) -#pragma config CPUDIV = NOCLKDIV// CPU System Clock Selection Bit (NO CPU system divide) -#pragma config USBLSCLK = 48MHz // USB Low SPeed Clock Selection bit (System clock expects 48 MHz, FS/LS USB CLKENs divide-by is set to 8.) -#pragma config PLLMULT = 3x // PLL Multipler Selection Bit (3x Output Frequency Selected) -#pragma config PLLEN = ENABLED // PLL Enable Bit (3x or 4x PLL Enabled) -#pragma config STVREN = ON // Stack Overflow/Underflow Reset Enable (Stack Overflow or Underflow will cause a Reset) -#pragma config BORV = LO // Brown-out Reset Voltage Selection (Brown-out Reset Voltage (Vbor), low trip point selected.) -#pragma config LPBOR = OFF // Low-Power Brown Out Reset (Low-Power BOR is disabled) -#pragma config LVP = ON // Low-Voltage Programming Enable -- cgit v1.2.3