Merge remote-tracking branch 'm900'

1 files changed, 83 insertions, 0 deletions

diff --git a/README.md b/README.md
new file mode 100644
index 0000000..c567b46
--- /dev/null
+++ b/README.md
@@ -0,0 +1,83 @@
+# Volute
+
+Volute is a graphical turbocharger selection program inspired by [BorgWarner MatchBot](https://www.borgwarner.com/matchbot/).
+Given a set of engine parameters, it plots flow rate vs. pressure ratio on a compressor map.
+
+Volute can plot up to 16 points on the compressor map.
+Points can be inserted and deleted dynamically.
+
+Volute supports both metric and imperial units.
+The unit for each parameter can be changed on the fly.
+
+Unlike MatchBot, which includes only BorgWarner turbos, Volute can be used to compare turbos from different brands.
+You can even add your own.
+
+The compressor is only one side of the story.
+A turbine that is well-matched to the engine is just as important.
+Unfortunately, turbine data are not as readily available as compressor maps are.
+As a result, Volute neglects the turbine side and focuses only on the compressor.
+If you plan to use a BorgWarner turbo, then MatchBot is your best bet because it includes a turbine sizing selector to help you choose the right turbine and housing.
+
+
+## Compiling on Linux/BSD/MacOS
+
+### Requirements
+- A C compiler (gcc)
+- make
+- SDL2
+
+### Instructions
+1. Clone the repository: `git clone https://github.com/sam-rba/volute.git`.
+2. Move to the directory: `cd volute`.
+3. Compile Volute: `make` or `make -j$(nproc)`.
+4. Run Volute: `./volute`.
+
+
+## Compiling on Windows
+
+Work in progress.
+Only Unix-like operatings systems are supported for now.
+
+
+## Usage
+
+Some knowledge of combustion engines and turbocharger compressor maps is required to use Volute effectively.
+There are lots of good books about turbos, and there's lots of good (and bad) information online as well.
+
+- _Turbochargers_, Hugh MacInnes, 1976.
+- _Maximum Boost_, Corky Bell, 1997.
+- [Garrett Knowledge Center](https://www.garrettmotion.com/knowledge-center-category/oem/expert/).
+- [BorgWarner MatchBot Tutorial](https://youtu.be/qIGDnbaBcJI).
+- Websites and forums.
+
+Enter the characteristics of your engine and start plotting points in its operating area.
+Insert or delete points by pressing the `Dup` (duplicate) and `Del` (delete) buttons.
+
+Change the unit that a parameter is displayed in by clicking on the unit and selecting a different one from the dropdown list.
+
+Select a compressor by pressing the compressor dropdown and selecting one from the list.
+Type in the brand name, series, or model name of the compressor you're looking for and press `filter` to narrow down the list.
+
+
+## Adding compressors
+
+Compressor maps are kept in the [`compressor_maps/`](compressor_maps/) directory.
+Each compressor has a JPEG image of the compressor map and a TOML file which describes it.
+
+To add a compressor, find an image of its compressor map and convert it to JPEG format.
+Then create a TOML file with the same base file name as the image and fill in the information about the compressor.
+For example, `borgwarner_efr_8374.jpg` and `borgwarner_efr_8374.toml`.
+Check out the existing ones to get an idea.
+
+A compressor's TOML file includes the brand of the company that manufactured it, the series that the turbo is a part of, and the name of the specific model.
+It also defines what type of units the compressor map uses for the flow rate on the x-axis.
+Valid flow rate units are `kg/s`, `lb/min`, `m³/s`, and `CFM`.
+The y-axis is always a (unitless) pressure ratio.
+
+A compressor's TOML file also defines two points on the compressor map: the origin, and a reference point.
+The origin should be the lowest (flow, PR) point on the chart, in the bottom-left corner.
+The reference point should be as far away from the origin, in the top-right, as practical, to increase the resolution in between.
+
+Each point has an x- and y-coordinate, measured in pixels from the top-left of the image.
+Each point also has the flow rate and pressure ratio at that point on the compressor map.
+Use an image editing program like MS Paint to find the pixel coordinates of each point, and record the corresponding flow rate and pressure ratio.