usbcom: modified libusb example

1 files changed, 0 insertions, 21 deletions

diff --git a/sw/config.h b/sw/config.h
deleted file mode 100644
index f369673..0000000
--- a/sw/config.h
+++ /dev/null
@@ -1,21 +0,0 @@
-// CONFIG1
-#pragma config FOSC = INTOSC // Oscillator Selection Bits (INTOSC oscillator: I/O function on CLKIN pin)
-#pragma config WDTE = OFF // Watchdog Timer Enable (WDT disabled)
-#pragma config PWRTE = OFF // Power-up Timer Enable (PWRT disabled)
-#pragma config MCLRE = ON // MCLR Pin Function Select (MCLR pin is MCLR)
-#pragma config CP = OFF // Flash Program Memory Code Protection (Program memory code protection is disabled)
-#pragma config BOREN = ON // Brown-out Reset Enable (Brown-out Reset enabled)
-#pragma config CLKOUTEN = OFF // Clock Out Enable (CLKOUT function is disabled. I/O or oscillator function on the CLKOUT pin)
-#pragma config IESO = OFF // Internal/External Switchover Mode (Internal/External Switchover Mode is disabled)
-#pragma config FCMEN = OFF // Fail-Safe Clock Monitor Enable (Fail-Safe Clock Monitor is disabled)
-
-// CONFIG2
-#pragma config WRT = OFF // Flash Memory Self-Write Protection (Write protection off)
-#pragma config CPUDIV = NOCLKDIV// CPU System Clock Selection Bit (NO CPU system divide)
-#pragma config USBLSCLK = 48MHz // USB Low SPeed Clock Selection bit (System clock expects 48 MHz, FS/LS USB CLKENs divide-by is set to 8.)
-#pragma config PLLMULT = 3x // PLL Multipler Selection Bit (3x Output Frequency Selected)
-#pragma config PLLEN = ENABLED // PLL Enable Bit (3x or 4x PLL Enabled)
-#pragma config STVREN = ON // Stack Overflow/Underflow Reset Enable (Stack Overflow or Underflow will cause a Reset)
-#pragma config BORV = LO // Brown-out Reset Voltage Selection (Brown-out Reset Voltage (Vbor), low trip point selected.)
-#pragma config LPBOR = OFF // Low-Power Brown Out Reset (Low-Power BOR is disabled)
-#pragma config LVP = ON // Low-Voltage Programming Enable